Products

Features
STM32F405 has 1MB flash which can run ArduPilot/INAV/BetaFlight
InvenSense the 3rd generation IMU ICM4288-P
9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.
8motors+3servos in INAV/BF multirotor mixer.
2x SH1.08pinconnectorforPnPwith 2x4in1ESC
1x SH1.0_6pin connector for PnP with HD System(Caddx Vista & Air Unit)
USB pin breakout for connecting to external USB adapter. Specifications
MCU:STM32F405RGT6
IMU:ICM42688-P
OSD:AT7456E,DJIOSD
Baro: SPL06-001 (12C)
Blackbox: 16M-byte Flash memory
6x UARTs,1x SoftserialTx option
12xPWM outputs (8x Dshot)
1×l2C
4x ADC (VBAT, Current, RSSI, Airspeed)
2xPINIO
2x SH1.0_8pin connector for 4in1 ESC
1x SH1.0_6pin connector for HD System(Caddx Vista & Air Unit)
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
9~16V(Vxs) output ON/OFF switchable
Dual analog camera signal switchable

Power
Input: 9-60V (3-12s LiPo)
BEC: 5V 1.
BEC:Vx,9~16V/1~2A(3SIN/9V 2A,4SIN/12V2A,6SIN/16V2A,8SIN/16V1.,12SIN/16V1A)
Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)
No Current Sensor built-in, supports external current sensor of PDB/4in1

Firmware
ArduPilot:MatekF405-TE
INAV:MATEKF405TE
BetaFlight:MATEKF405TE

Physical
Mounting:30.5x 30.5mm,Φ4mmwithGrommets Φ3mm
Dimensions:36×36×5mm
Weight: 7g

Including
1xFCF405-HDTE
6x Silicon grommets M4 to M3
1× SH1.0_8pin cable 5cm,2x SH1.0_8pin connectors
1x SH1.0_6pin to GH1.25_8pin cable 8cm for HD System(Caddx Vista & Air Unit